Metals Microscopic Examination Essay

This essay has a total of 343 words and 2 pages.

Metals Microscopic Examination

In this experiment, our aim is examining the microstructure of metals. By
studying microscopic structures of metals, we determine which material fits best
to a given application. We used the most common method, optical technique, to
examine the microstructure. We used a small specimen cut from the metal to be
examined. To be able to see the structure clearly, we first cleaned and polished
the specimen. First we start polishing with emery paper no: 1 and some finer
grades. One should be careful about the coarse abrasive particles and striations
from them. Cleaning and rotating the specimen 90? during the transfer can
prevent these. The next step is polishing, yet washing the sample before
polishing gives a more successful result. Finally, we polished the specimen on a
rotating cloth covered with an effective abrasive like Al2O3-Water suspension.

We kept polishing until we obtained a mirror like face. After we finished
polishing, the crystalline structure of the specimen, any cracks, seams,
non-metallic inclusions and inhomogenities, could be revealed. Before start
etching we first applied mounting process. In this step we used a matched die
set. We placed our sample into the die set in the way that the rough face of the
specimen was the lower surface and the polished face looked upward. We filled
the die cavity with Bakelite and then we transferred our die to a mounpress.

Continues for 1 more page >>